Ethernet-Gateway-Small

Pharmacold Ethernet Gateway

CAD $395.00

The Pharmacold Ethernet gateway allows your Pharmacold Wireless Sensors to communicate with Pharmacold Monitoring Software without the need for a PC.

Category:

Product Description

The Pharmacold Ethernet gateway allows your Pharmacold Wireless Sensors to communicate with Pharmacold Monitoring Software without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to Pharmacold Monitoring Software.

The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.

  • AC power supply (POE version also available)
  • Existing Internet connection required
  • No PC required for operation
  • Real time TCP interface
  • SNMP poll and trap interface
  • MODBUS TCP interface
  • FCC, IC and CE certified

 

Additional Information

Ethernet Gateway Specifications

Ethernet Gateway Dimension

139.85 x 101.75 x 34.95 mm

Storage Temperature

-20 to +85 °C (-4 to 185 °F)

Enclosure Material

ABS plastic

LED Lights

H/W status, Pharmacold Monitoring Software connection status, sensor data activity

Antenna Type

SMA: 5.0 dBi Gain

Operating Temperature

-10 to +70 °C (14 to +158 °F)

Device Memory

16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)

Hardware

10/100 Ethernet Controller

IEEE Standard Compliance

802.3-2002

Operation

Full- and Half-Duplex

Cross-Over Correction

Automatic MDI/MDI-X

Addressing

Pre-programmed MAC Address

Host Address

t1.sensorsgateway.com

Default Port

3000

Protocols Supported

UDP, DHCP, TCP, SNMP, MODBUS

Cable Connector

Cat 5

Current Requirements, Full Operation

225 mA steady

Interface Support

Real-Time TCP Interface SNMP Poll and Trap Interface MODBUS TCP Interface

Power Supply

5.5 V AC adapter Power-Over-Ethernet option requires 5.5 V Ethernet power injector (not included)

900 MHz Specifications

Operating Frequency

900 MHz Operating Frequency

Certifications

Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1) Complies with Industry Canada standards. (IC: 9794A-RFSC1)

TOP